Home > Products > SA 516 Gr 60 > SA516 Gr 60 Plates
In critical boiler and pressure vessel projects, even a single uncertified plate can lead to shutdown losses, failed inspections, or safety risks.
That’s why global buyers—from EPC contractors to refinery engineers—trust Navgraha Steels INC, Mumbai, Maharashtra – India for SA516 Gr 60 plates.
We don’t just deliver steel; we deliver assurance that your project runs smoothly, passes every audit, and remains safe for decades.
SA516 Gr 60 is a carbon steel plate manufactured to ASTM A516 / ASME SA516 standards, designed for boiler and pressure vessel applications
In simple terms: SA516 Gr 60 plates are the safe, cost-effective, and trusted choice for pressure vessels worldwide.
Engineers and procurement teams know the hidden costs of wrong sourcing:
With Navgraha Steels INC’s SA516 Gr 60 plates, you get:
That’s why our plates are auditor-approved and engineer-preferred across industries.
| Property | Value (Typical) | Why It Matters |
|---|---|---|
| Tensile Strength | 415–550 MPa | Prevents rupture under stress |
| Yield Strength | Min 220 MPa | Ensures safety against deformation |
| Elongation | 17–21% | Ductility for bending & forming |
| Impact Tested | -20°C optional | Suitable for low-temperature service |
| Hardness (BHN) | ≤ 250 | Balanced toughness + weldability |
These values aren’t just numbers — they are the reason EPCs, refineries, and power plants specify SA516 Gr 60 plates for their projects.
| Element | % Range |
|---|---|
| Carbon (C) | ≤ 0.21 |
| Manganese (Mn) | 0.55–1.20 |
| Phosphorus (P) | ≤ 0.035 |
| Sulfur (S) | ≤ 0.035 |
| Silicon (Si) | 0.13–0.45 |
Balanced chemistry ensures:
With Navgraha Steels INC, every plate is traceable, certified, and trusted.
A common buyer pain is: “Will this plate meet my project’s code in another country?”
Our SA516 Gr 60 plates are globally recognized and accepted:
With Navgraha Steels INC, you get plates that meet international codes and pass third-party inspections worldwide.
Finding the right thickness shouldn’t mean calling 10 suppliers. With us, you get ready stock
From thin plates for fabrication to thick plates for refinery shells, Navgraha Steels INC ensures availability.
Choosing the wrong treatment can mean failed weld tests. That’s why we provide:
Consulting Tip: Always order Normalized SA516 Gr 60 plates for refinery and IBR-approved projects. It’s the safe choice.
Buyer worry: “Will the plate crack during forming or welding?”
Our SA516 Gr 60 plates are:
This means fewer fabrication rejections, faster project execution, and happier auditors
Too many traders supply uncertified, re-rolled plates. At Navgraha Steels INC, you get:
We are not just suppliers; we are export partners who secure your project against audit risks.
We keep ready stock of all high-demand variants:
With Navgraha Steels INC, you always get the exact variant your project demands — no delays, no excuses
When you source from Navgraha Steels INC, Mumbai, you get more than plates — you get a global partner. We export SA516 Gr 60 plates from Nhava Sheva Port to:
Every plate is seaworthy packed, palletized, and shrink-wrapped for zero damage in transit and zero rejection at inspection.
Choosing the wrong plate grade leads to audit failures and costly shutdown delays. Here’s a consultant’s checklist:
Tip from Navgraha: For refinery projects, always go for Normalized + EN 10204 3.2 certified plates. This ensures smooth audit clearance.
Buyer pain: “Will my inspector accept these certificates, or will they demand retesting?”
Every SA516 Gr 60 plate from Navgraha Steels INC is supplied with:
Result: Your project auditors get proof, not excuses.
Gr 60 has lower tensile strength (415–550 MPa) than Gr 70 (485–620 MPa). Gr 60 is used for moderate pressure/temperature, while Gr 70 suits higher stress conditions.
Yes. We supply IBR-certified plates that are accepted for Indian boiler and pressure vessel projects.
We supply plates from 6 mm to 150 mm thick, widths up to 3,500 mm, and lengths up to 12,000 mm.
Yes. We provide NACE MR0175/MR0103 and HIC-tested plates, demanded by GCC and refinery projects.
MTC 3.1/3.2, IBR, NACE, HIC, and third-party inspection reports from Lloyds, DNV, TÜV, SGS, ABS.
Prices depend on thickness, treatment (AR/N/Q+T), and certification. Contact us for the latest price list.
Because we provide certified stock, export-ready delivery, third-party approvals, and global credibility, ensuring your project passes audits on time.
Every hour of shutdown costs lakhs. Don’t risk delays with uncertified plates.
With Navgraha Steels INC, Mumbai, you get:
Call to Action: Request a quote now. Secure certified SA516 Gr 60 plates from Mumbai’s most trusted exporter before your project deadline slips.
