Home > Products > SA 516 Gr 70 > SA 516 Gr.70 Plates, Sheets & Coils Brand
Every project engineer knows that SA 516 Gr.70 is the most specified pressure vessel steel across refineries, chemical plants, boilers, and EPC projects.
But what many buyers struggle with is:
At Navgraha Steels INC, Mumbai, we provide a clear answer. We only supply SA 516 Gr.70 plates, sheets & coils from globally trusted mills:
Sail | AMNS | JSPL | Evonith | Nippon Yakin | Outokumpu | Special Metals | VDM | ATI
This means buyers get authentic, traceable, mill-certified steel—with zero risk of fake MTCs or project delays.
Global brands matter because not all SA 516 Gr.70 is the same.
Choosing the right brand means:
At Navgraha Steels INC, we prevent these risks by:
A Saudi EPC contractor once approached us after receiving SA 516 Gr.70 from a local dealer that failed NACE test. Their shutdown project was at risk.
Within 72 hours, Navgraha Steels INC supplied genuine Sail & AMNS SA 516 Gr.70 plates with certified documentation, allowing the project to continue without further loss.
Since then, the client insists on sourcing only branded SA 516 Gr.70 through Navgraha Steels INC.
Sail is one of the most recognized Indian mills for pressure vessel steel. With decades of trust, Sail’s SA 516 Gr.70 is widely used in boilers, refineries, and chemical industries.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 6 mm – 150 mm | NACE / HIC Tested, Dual Certified | High tensile strength, notch toughness | Boilers, refineries, petrochemical plants | 100% Sail MTCs, urgent stock dispatch |
| Sheets | 2 mm – 50 mm | Cut-to-size SA 516 Gr.70 | Uniform thickness, dimensional accuracy | Fabrication, pharma & chemical vessels | Ready-to-use sheets, zero wastage |
| Coils | Width: 1000–2000 mm | HR / CR Coils | Consistent rolling, weldability | Tanks, marine structures | Slitting, leveling, export-ready supply |
AMNS (ArcelorMittal Nippon Steel) is known for modern rolling technology and global quality benchmarks, making its SA 516 Gr.70 ideal for EPC and shutdown projects.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 6 mm – 120 mm | NACE / HIC Tested | Strong weldability, global approvals | Refineries, oil & gas, chemical plants | Genuine AMNS documents, on-time supply |
| Sheets | 3 mm – 40 mm | Custom cut sizes | Precision finish, surface quality | Fabrication, heat exchanger parts | Customized supply, reduced scrap |
| Coils | Width: 1000–1800 mm | HR / CR Coils | Dimensional accuracy | Marine, pressure vessel rolling | Quick delivery, export packaging |
JSPL has earned a reputation for producing heavy thickness plates in SA 516 Gr.70, suitable for critical pressure vessel applications.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 8 mm – 200 mm | NACE / HIC Tested | Heavy plate rolling capacity | Boilers, reactors, refinery vessels | Mill traceability, quick export clearance |
| Sheets | 4 mm – 60 mm | Custom cut sizes | Uniform strength, notch toughness | Process industry, fabrication | Ready stock, cut-to-size |
| Coils | Width: 1200–2000 mm | HR Coils | Strong mechanical consistency | Large tanks, pipelines | Slitting & just-in-time supply |
Evonith has built trust in supplying high-strength steel for critical pressure vessel projects. Their SA 516 Gr.70 is valued for quality consistency and mechanical reliability.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 6 mm – 120 mm | NACE / HIC Tested | Reliable toughness, weldability | Pressure vessels, boilers | Traceable Evonith MTCs, export packing |
| Sheets | 3 mm – 40 mm | Cut-to-size | Uniform finish, dimensional stability | Fabrication, pharma vessels | Cut-to-size, polished finish |
| Coils | Width: 1000–1800 mm | HR / CR Coils | Consistent rolling & durability | Tanks, EPC use | Ready stock, slitting, export supply |
As a Japanese mill, Nippon Yakin is globally known for stringent quality control. Their SA 516 Gr.70 is trusted in oil & gas, LNG, and petrochemical projects.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 6 mm – 150 mm | NACE / HIC / SSC Tested | Superior low-temp toughness | LNG tanks, refinery boilers | Genuine Japanese certification |
| Sheets | 2 mm – 40 mm | Custom sizes | Precision rolling, surface quality | Heat exchangers, fabrication | Import stock, cut-to-size service |
| Coils | Width: 1000–1800 mm | HR / CR Coils | International rolling standards | EPC, marine, oil & gas | Global approvals, reliable export handling |
Outokumpu (Finland/Europe) is known for producing premium stainless & alloy steels, and their SA 516 Gr.70 variants are favored in critical European & global projects.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 6 mm – 120 mm | NACE / HIC Tested | High notch toughness | Refineries, pressure vessels | Direct Outokumpu material, export docs |
| Sheets | 2 mm – 30 mm | Custom cut | Dimensional accuracy, clean surface | Pharma, marine fabrication | Imported sheets, zero compromise |
| Coils | Width: 1000–2000 mm | HR / CR Coils | Consistency, global standard | Tanks, chemical plants | Export packaging, global compliance |
Special Metals is trusted for niche alloys and high-spec steel, making their SA 516 Gr.70 a preferred choice for oil & gas and offshore industries.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 8 mm – 150 mm | HIC Tested | High resilience & weldability | Offshore, refinery projects | Certified imports, quick delivery |
| Sheets | 3 mm – 40 mm | Custom cut | Stability, precision finish | EPC & fabrication | Tailored sheet supply |
| Coils | Width: 1000–1800 mm | HR / CR Coils | Strength & formability | Pipelines, tanks | Export-ready supply |
VDM Metals (Germany) is known for its metallurgical expertise and alloy quality. Their SA 516 Gr.70 is widely used in European EPC and chemical projects.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 6 mm – 100 mm | NACE / HIC Tested | Superior uniformity, toughness | Boilers, heat exchangers | German mill docs, global approvals |
| Sheets | 2 mm – 25 mm | Cut-to-size | Precision rolled, clean finish | Chemical vessels, pharma | Certified imports, zero defects |
| Coils | Width: 1000–1600 mm | HR / CR Coils | Surface finish & strength | EPC, marine | Slitting, packaging, fast supply |
ATI (Allegheny Technologies, USA) supplies some of the most trusted steels for high-pressure and high-temperature industries. Their SA 516 Gr.70 is especially valued in oil, gas, and power generation projects.
| Category | Thickness / Size Range | Available Variants | Key Strengths | Applications | Buyer Advantage with Navgraha |
|---|---|---|---|---|---|
| Plates | 6 mm – 120 mm | NACE / HIC / SSC Tested | Global quality standards | Boilers, oil refineries | US-origin docs, reliable export |
| Sheets | 2 mm – 30 mm | Custom cut | Dimensional accuracy | Fabrication, EPC jobs | Import stock, ready dispatch |
| Coils | Width: 1000–1800 mm | HR / CR Coils | Uniform rolling, weldability | Tanks, petrochemical | Export packaging, traceability |
At Navgraha Steels INC, Mumbai, we don’t just stock SA 516 Gr.70 from global brands — we export it daily.
Our plates, sheets, and coils are shipped to:
Each shipment is packed as per export standards (sea-worthy, fumigation, edge protection, anti-rust wrapping) so buyers receive ready-to-use steel with zero damage.
Choosing between Sail, AMNS, JSPL, Nippon Yakin, Outokumpu, ATI, and others can feel overwhelming. Here’s how we guide you:
Instead of guessing, our experts analyze your project specs + delivery timeline and match you with the right brand at the right cost.
To cover every application, we keep stock of the most demanded variants:
Every SA 516 Gr.70 plate, sheet, and coil supplied by us comes with:
This means buyers get fully traceable steel, accepted worldwide without dispute.
Yes, we supply NACE & HIC tested plates from Sail, AMNS, JSPL, ATI, Nippon Yakin, and Outokumpu — with full test reports.
Yes, we supply custom-cut sheets as per drawing requirements to minimize wastage.
From 6 mm to 200 mm in plates, 2–60 mm in sheets, and 1000–2000 mm width coils depending on the brand.
From our Mumbai stockyard, dispatch can be arranged within 48–72 hours for urgent projects.
GCC (Saudi, UAE, Oman, Qatar), Africa (Nigeria, South Africa), Asia (Vietnam, Singapore, Indonesia), and Europe/USA.
Mill Test Certificates, packing list, invoice, Bill of Lading, and if required, third-party inspection reports (SGS, BV, TÜV, Lloyd’s).
Looking for SA 516 Gr.70 plates, sheets, or coils from trusted mills like Sail, AMNS, JSPL, Nippon Yakin, Outokumpu, ATI?
Get mill-certified material, urgent delivery, and export-compliant packing — directly from Navgraha Steels INC, Mumbai.
Request Price & Datasheet Now – and secure your project with genuine branded steel.
